From: Tim Osborn To: Jonathan Overpeck Subject: Re: Special instructions/timing adjustment Date: Mon Jul 24 15:58:18 2006 Cc: Eystein Jansen , Keith Briffa , Fortunat Joos Hi Peck et al., I've increased the axis labelling font size by another pt in all plots. I attach two versions of 6.10, one in the grey (same as before except for bigger axis labelling) and one in brown. Brown looks like some old curry stain (or worse!). Note that conversion from postscript to PDF or GIF tends to alter the colours, which alter again on different printers compared with the screen. So there's not much point in me playing around much more with the colours. Also attached are new versions of 6.13 and 6.14. Both have the bigger axis fonts and the matching grey shading as 6.10. 6.13 has thicker lines for all models, so they show up better on the new darker grey shading. 6.14 now has the EMIC forcing shown without any smoothing. I have used a vertical scale for the volcanoes which is half that of the solar and anthropogenic forcings. Only one spike (1258) hits the bottom of the plot with this choice of scaling, and only a couple overlap the solar forcing lines. What do you think now (Fortunat too)? Oh, and I also start now at 1000 rather than 900 AD. Cheers Tim At 17:06 22/07/2006, Jonathan Overpeck wrote: Hi Tim - this looks pretty nice, and I appreciate your chugging through to make the switch to 5-95%. I'd still be keen to see what the fig looks like in some more modest color than the old red. Grey could be the final choice, but it's not too much of a hassle, could you try a color version that is a bit more sharp? Also, it would be nice to make the x-axis labels (numbers and "Year") as large as makes sense - they still seem too small. Sorry to be nitpicky, but this figure is going to be a major one of the whole report, so it makes sense to get it as perfect as we can. Thanks! best, peck Hi Peck and Eystein, what do you think of the attached new version of 6.10? Keith and I have spent some time examining various options and think that this one looks clearer (less smudgy) while still being a good representation of the data and in grey. I spoke with Phil and Keith and the 5-95% range seems preferable for consistency with other chapters. So: (1) I now use 5-95% range in panel (a). (2) Panel (b) has no further changes to it. (3) Panel (c) is now also based on the overlap of the 5-95% ranges of the individual reconstructions, rather than on the +-2 standard error ranges (extra weight is still given for temperatures that fall within the +-1 SE range). I also applied some week smoothing prior to plotting. I also now plot using just 10 grey shades, in 10% steps, rather than the 20 shades in 5% steps that I used previously (in the last version, I changed the scale bar to have 10 steps of 10%, but I had still plotted the data using 20 steps of 5%). Hope you like it, Tim At 17:33 20/07/2006, Jonathan Overpeck wrote: Hi Tim - Thanks. If you don't mind, let's see what the new grey in panel c, and also the 5-95% range on a. Also, another alternative to the grey and red could be some other color that is just less bright - perhaps blue? Agree there is no reason to switch the reviewed panel c uncertainty approach. It argues a bit that we leave panel a as is too. I'm unsure what is best, so maybe see what Keith thinks too - and discuss more with Phil - he is right that most are trying to go with 5-95 where possible. Thanks again. Hi again, I still have the red option built into the program, so can easily revert to it. Of course the grey has the advantage of consistency with the model and EMIC panels, which really must be grey so that all the coloured lines indicating the simulated temperatures will show up (red isn't really an option for the reconstruction shading in those figures). I'll see if I can make it clearer yet keep it in grey. On a different note, Phil Jones just popped in and said why are we using "+-2SE" shading in the top instrumental panel when it has apparently been decided to show the smaller 5-95% range (he says this is only 0.8225 times the +-2SE range) in all IPCC WG1 figures. Shall I change this? If I do, then the brown and orange curves will fall outside this narrower range more often than they fall outside the current wider SE range. The grey shading in panel (c) is also computed from the overlap of the +-1 SE and +-2 SE ranges of individual reconstructions, but I guess this can stay unchanged, rather than needing to be recalculated using the overlap of the ?-?% and 5-95% ranges? Cheers Tim At 16:05 19/07/2006, Jonathan Overpeck wrote: Hi Tim - thanks! Now I can see why you went with the red rather than grey in the bottom panel - it's hard to see. I'd like to float the idea with everyone on the email that we consider going back to red, or try something else. All else is good (thanks) perhaps make the bottom/top axis labels bigger still? (both numbers and "Year"). Thx again, Peck Hi Peck et al., revised fig 6.10 is attached. At 21:36 30/06/2006, Jonathan Overpeck wrote: Figure 6.10. 1. shade the connection between the top and middle panels It was already shaded. Your poor old eyes must be failing you ;-) Ok, so it *was* rather pale! I've made it a bit darker. 2. remove the dotted (long instrumental) curve from the middle panel Done 3. replace the red shaded region in the bottom panel with the grey-scale one used in Fig 6.13 Done - how does it look now? I had to outline the instrumental series with a narrow white band to ensure it could be seen against the very dark grey shading. 4. label only every increment of 10 in the grey-scale bar (formally color) in the bottom panel Done 5. Increase font sizes for axis numbering and axis labeling - all are too small. You can figure out the best size by reducing figs to likely page size minus margins. We guess the captions need to be bigger by a couple increments at least. Increased the axis numbering/labelling by a couple of points. Cheers Tim Attachment converted: Macintosh HD:chap6_f6.10.pdf (PDF /«IC») (00141E77) Dr Timothy J Osborn, Academic Fellow Climatic Research Unit School of Environmental Sciences, University of East Anglia Norwich NR4 7TJ, UK e-mail: t.osborn@uea.ac.uk phone: +44 1603 592089 fax: +44 1603 507784 web: [1]http://www.cru.uea.ac.uk/~timo/ sunclock: [2]http://www.cru.uea.ac.uk/~timo/sunclock.htm **Norwich -- City for Science: **Hosting the BA Festival 2-9 September 2006 -- Jonathan T. Overpeck Director, Institute for the Study of Planet Earth Professor, Department of Geosciences Professor, Department of Atmospheric Sciences Mail and Fedex Address: Institute for the Study of Planet Earth 715 N. Park Ave. 2nd Floor University of Arizona Tucson, AZ 85721 direct tel: +1 520 622-9065 fax: +1 520 792-8795 [3]http://www.geo.arizona.edu/ [4]http://www.ispe.arizona.edu/ Dr Timothy J Osborn, Academic Fellow Climatic Research Unit School of Environmental Sciences, University of East Anglia Norwich NR4 7TJ, UK e-mail: t.osborn@uea.ac.uk phone: +44 1603 592089 fax: +44 1603 507784 web: [5]http://www.cru.uea.ac.uk/~timo/ sunclock: [6]http://www.cru.uea.ac.uk/~timo/sunclock.htm **Norwich -- City for Science: **Hosting the BA Festival 2-9 September 2006 -- Jonathan T. Overpeck Director, Institute for the Study of Planet Earth Professor, Department of Geosciences Professor, Department of Atmospheric Sciences Mail and Fedex Address: Institute for the Study of Planet Earth 715 N. Park Ave. 2nd Floor University of Arizona Tucson, AZ 85721 direct tel: +1 520 622-9065 fax: +1 520 792-8795 [7]http://www.geo.arizona.edu/ [8]http://www.ispe.arizona.edu/ Attachment converted: Macintosh HD:chap6_f6.10 1.pdf (PDF /«IC») (001427F4) Dr Timothy J Osborn, Academic Fellow Climatic Research Unit School of Environmental Sciences, University of East Anglia Norwich NR4 7TJ, UK e-mail: t.osborn@uea.ac.uk phone: +44 1603 592089 fax: +44 1603 507784 web: [9]http://www.cru.uea.ac.uk/~timo/ sunclock: [10]http://www.cru.uea.ac.uk/~timo/sunclock.htm **Norwich -- City for Science: **Hosting the BA Festival 2-9 September 2006 -- Jonathan T. Overpeck Director, Institute for the Study of Planet Earth Professor, Department of Geosciences Professor, Department of Atmospheric Sciences Mail and Fedex Address: Institute for the Study of Planet Earth 715 N. Park Ave. 2nd Floor University of Arizona Tucson, AZ 85721 direct tel: +1 520 622-9065 fax: +1 520 792-8795 [11]http://www.geo.arizona.edu/ [12]http://www.ispe.arizona.edu/ References 1. http://www.cru.uea.ac.uk/~timo/ 2. http://www.cru.uea.ac.uk/~timo/sunclock.htm 3. http://www.geo.arizona.edu/ 4. http://www.ispe.arizona.edu/ 5. http://www.cru.uea.ac.uk/~timo/ 6. http://www.cru.uea.ac.uk/~timo/sunclock.htm 7. http://www.geo.arizona.edu/ 8. http://www.ispe.arizona.edu/ 9. http://www.cru.uea.ac.uk/~timo/ 10. http://www.cru.uea.ac.uk/~timo/sunclock.htm 11. http://www.geo.arizona.edu/ 12. http://www.ispe.arizona.edu/